In-line chain set lower off with pigtail

Description

A complete lower off assembly consisting of two glue-in anchors with the upper anchor connected by stainless steel chain to a 10mm diameter pigtail installed on the lower anchor.

In-line lower offs are the cheapest configuration when rock conditions require the placement of the back up anchor in an awkward position e.g. around a corner or at the rear of a ledge.

The lower anchor (with pigtail) can be positioned in the best location for an optimum hang.

All components are ‘metal matched’ and fabricated from high quality stainless steel in 1.4401 / AISI 316 / A4 grade.

We manufacture the chain sets using glue-in twist leg anchors with 100mm or 150mm leg length.

Application

• As a lower off installed at the top of a single pitch sport route
• Rock climbing

Specification

Link thickness: 8mm

Pigtail thickness: 10mm

Size: 52mm internal link length

Material: 1.4401 / AISI 316 / A4

Chain breaking strain: 58.9kN from internal testing

590g (with 6mm * 100mm glue-ins)

680g (with 8mm * 100mm glue-ins)

Anchor standard: EN 959

Chain standard: DIN 763

Manufactured from high quality European sourced stainless steel.